Transport Canada
www.tc.gc.ca
Common menu bar links
Institutional links
Acts and Regulations
Browse Acts and Regulations Resources
Browse By Mode
Browse By Subject
About Us
Motor Vehicle Safety Regulations (C.R.C., c. 1038)
Brake Hoses (Standard 106)
- Statutory Text
- Regulatory Initiatives (specific to the regulation section)
- Government Notices (specific to the regulation section)
Statutory Text
Transport Canada assumes no responsibility for the accuracy or reliability of the statutory and regulatory information provided by this profile. This regulatory material has been prepared for convenience of reference only. For all purposes of interpreting and applying the law, users should consult the official publications of Canada's laws, which are available in most public libraries.
Consolidated text
- Motor Vehicle Safety Regulations (C.R.C., c. 1038)
Regulatory Initiatives and Government Notices updated to 2012.02.11
Brake Hoses (Standard 106)
- [SOR/93-561, s. 3;
- SOR/2011-238, s. 1]
106. (1) Every brake hose, brake hose assembly and brake hose end fitting with which a passenger car, multi-purpose passenger vehicle, truck, bus, three-wheeled vehicle, motorcycle, trailer, and trailer converter dolly are equipped shall conform to the requirements of Technical Standards Document No. 106, Brake Hoses (TSD 106), as amended from time to time.
(2) A reference in TSD 106 to a standard published by ASTM that is set out in column 1 of the table to this subsection may be read as a reference to the standard set out opposite that standard in column 2 of the table.
TABLE
| Item | Column 1 | Column 2 |
|---|---|---|
| 1. | ASTM B 117 – 03, Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM B 117 – 07a, Standard Practice for Operating Salt Spray (Fog) Apparatus |
| 2. | ASTM D 471 – 98ε1, Standard Test Method for Rubber Property — Effect of Liquids | ASTM D 471 – 06ε1, Standard Test Method for Rubber Property — Effect of Liquids |
| 3. | ASTM D 4329 – 99, Standard Practice for Fluorescent UV Exposure of Plastics | ASTM D 4329 – 05, Standard Practice for Fluorescent UV Exposure of Plastics |
| 4. | ASTM E 4 – 03, Standard Practices for Force Verification of Testing Machines | ASTM E 4 – 08, Standard Practices for Force Verification of Testing Machines |
| 5. | ASTM G 151 – 97, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | ASTM G 151 – 06, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| 6. | ASTM G 154 – 00, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials | ASTM G 154 – 06, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials |
(3) This section expires on January 31, 2016.
- SOR/79-677, s. 3;
- SOR/79-907, s. 1;
- SOR/93-561, s. 4;
- SOR/97-421, s. 16;
- SOR/2007-180, s. 6;
- SOR/2009-318, s.8;
- SOR/2009-330, s. 1;
- SOR/2011-238, s.1.
Regulatory Initiatives (specific to the regulation section)
Depending on the date, amendments listed may not yet be included in the consolidated text.
Regulations Amending the Motor Vehicle Safety Regulations (Standards 105, 106, 116, 118, 123, 124, 131, 135, 209, 301, 302, 305, 401 and 500)
Canada Gazette Part II, Vol. 145, No. 23 — November 9, 2011
Regulations Amending the Motor Vehicle Safety Regulations (Standards 105, 106, 116, 118, 123, 124, 131, 135, 209, 301, 302, 305, 401 and 500)
SOR/2011-238 October 27, 2011
CIF November 9, 2011.
Government Notices (specific to the regulation section)
No current notices.
To access the Portable Document Format (PDF) version you must have a PDF reader installed. If you do not already have such a reader, there are numerous PDF readers available for free download or for purchase on the Internet:
