1. Home
2. Air Transportation
3. Aircraft
4. National Aircraft Certification
5. Delegations and Quality Division
6. Delegations Handbook for Designated Engineers and Design Approval Representatives
7. Appendix D - Sample Engineering Procedures Manual

Appendix D - Sample Engineering Procedures Manual

The following Design Approval Representative Engineering Procedures Manual is a sample to illustrate the content and level of details that should be included in a DAR manual when used with the "Delegations Handbook for Designated Engineers and Design Approval Representatives". This is not to infer that this is the only acceptable format for the manual.

Engineering Procedures Manual (EPM)

Specialty: Structures

Robert Smythe, DAR No. 777
Pacifica Aerospace Corporation
2853 Walking Road
Edmonton, AB
T3R 7K1

• EPM Approval Page
• Delegation of Authority Certificate
• Revision Approval Page
• List of Effective Pages
• Section 1:  Delegate Information and Commitment
  • 1.1  Purpose of Engineering Procedures Manual
  • 1.2  Appointment
  • 1.3  Business Address
  • 1.4  Authorization
    • 1.4.1  Commitment
    • 1.4.2  Control of Delegated Privileges
    • 1.4.3  Resources
  • 1.5  Acronyms
  • 1.6  References
  • 1.7  EPM Distribution
• Section 2:  Airworthiness Control Procedures
  • 2.1  Coordination Procedures
    • 2.1.1  Operating in Other Regions
    • 2.1.2  Operating with Other Delegates
      • 2.1.2.1  Multiple DAR Approval Projects
      • 2.1.2.2  Joint Programs with a DAO or an AEO
    • 2.1.3  Subcontracted Engineering Support
  • 2.2  Special Procedures
    • 2.2.1  PAC Engineering Service Bulletin
    • 2.2.2  Document Distribution
• Section 3:  Scope of Authority
  • 3.1  DAR Authorized Functions
  • 3.2  Limitations
  • 3.3  Overlapping Responsibilities
  • 3.4  Change to Authorization
  • 3.5  Duration of Authorization
• Appendix A:  Completed AWM 505C Compliance Checklist
• Appendix B:  Functional Matrix - Structures Specialty
• Appendix C:  Specialty Delegation Matrix - AWM 525
• Appendix D:  Letter of Authorization
• Appendix E:  PAC Engineering Service Bulletin

Date modified:

2011-12-28

Primary navigation