Section 2

Qualification Test Guide

Approval Page

Company Name: _______________________________________________

FTD Type/Name: _______________________________________________

Type of Aircraft Represented: _____________________________ i.e. C172

The above mentioned Flight Training Device has met the requirements applicable to Flight Training Devices in accordance with section 606.03 - Synthetic Flight Training Equipment of the Canadian Aviation Regulations.

The operator is responsible for the validation of the Flight Training Device in order to maintain a valid status on the list of approved Flight Training Devices and allow the recognition of credits for the training completed on the device.

Date of Approval: _______________________________

____________________________ ____________________________
Company Transport Canada
 

FTD Identification

2.1.1  The Qualification Test Guide herein is applicable to FTD ID #____________, for qualification to Level ___ FTD in accordance with Transport Canada Aeroplane and Rotorcraft Simulator Manual, TP 9685 Revision 2.

2.1.2  FTD Model _______________________was manufactured by _______________________.

2.1.3  For the purpose of this test guide, APPR Flap is considered to be ______ degrees of flap.

2.1.4  For the purpose of this test guide, WEIGHT is considered to be _______ KG or ________ LB

2.1.5  Approval was based on using a _____________________________ computer type.

2.1.6  Equipment required to conduct the certification is a __________________________ spring scale and a digital stop watch.

2.1.7  Method of attachment _____________________________________

2.1.8  All validation tests are conducted under ISA conditions, therefore temperatures are not part of the initial conditions for each test.

2.1.9  Acceptable location, (the FTD shall be in a closed room suitable to conduct training)?

Yes _______  No _______

2.1.10  Pilot's seat arrangement - Fixed pilot's seat/s shall be adjustable fore and aft. The seat height shall be equivalent to aircraft seating, (distance from cushion to yoke).

Yes _______   No _______

2.1.11  Instructor console: The instructor console shall be positioned and designed to enable the instructor to readily introduce faults, configuration changes and to freeze the FTD without distracting the trainees.

Yes _______   No _______

2.1.12  Aircraft type Log book available?

Yes _______   No _______

(Note:  Any other descriptions or items considered to be appropriate may be added on this page.)