1. Home
2. Air Transportation
3. Aviation Safety
4. Policy and Regulatory Services
5. Regulatory Affairs
6. External Delegation of Authority #149545
7. SCHEDULE 7

SCHEDULE 7

No. 149545 February 9, 1999

Minister's Delegate, Aircraft Maintenance and Manufacturing

Pursuant to the indicated sections of the Canadian Aviation Regulations, and subject always to any conditions deemed necessary for flight safety and the protection of persons or property on the ground or water and to any other limitations imposed by the terms of their appointment, consistent with their responsibilities, knowledge, training, and experience.

1. 507.02 To issue a certificate of airworthiness in respect of an aircraft for which an aircraft type design has been certified pursuant to Subpart 511 and the certification is not restricted or provisional; that conforms to its certified type design; and is safe for flight.
   
   
2. 507.03 To issue a special certificate of airworthiness in respect of an aircraft that meets the criteria for one of the classifications specified in Chapter 507 of the Airworthiness Manual; conforms to the applicable type design or, in the case of an amateur-built aircraft, is designed and constructed in conformity with the requirements of Chapter 549 of the Airworthiness Manual; and is safe for flight.
   
   
3. 507.04 To issue a flight permit in respect of an aircraft that meets the criteria for one of the classifications of a flight permit specified in Chapter 507 of the Airworthiness Manual and that is safe for flight.
   
   
4. 509.03(1) To issue an export airworthiness certificate where the aircraft in respect of which the application is made, conforms to the type design specified in a type certificate issued pursuant to Subpart 511; or another type design specified in the application, where the aircraft is being exported to a state with which Canada has entered into an agreement that provides for the acceptance of export airworthiness certificates and the aircraft conforms to any special requirements specified by that state.
   
   
5. 509.03(2) To issue an export airworthiness certificate that specifies a non-conformity to the applicable type design or any special requirement and the acceptance of that non-conformity by the state to which the aircraft is being exported.

Date modified:

2010-03-31

Primary navigation