Part V - Chapter 531 Appendix A Instructions for Continued Airworthiness
- Part I
- Part II
- Part III
- Part IV
- Part V
- Chapter 500
- Standard 501
- Chapter 505
- Standard 507
- Standard 509
- Chapter 511
- Chapter 513
- Chapter 516
- Chapter 522
- Chapter 523 (VLA)
- Chapter 523
- Chapter 525
- Chapter 527
- Chapter 529
- Chapter 531
- Chapter 533
- Chapter 535
- Chapter 537
- Chapter 541
- Chapter 549
- Chapter 551
- Standard 561
- Chapter 563
- Chapter 566
- Standard 571
- Standard 573
- Standard 591
- Standard 593
- Part VI
- Part VII
- Part VIII
- Part IX
Canadian Aviation Regulations (CARs) 2017-2
Content last revised: 1999/12/01
(a) This appendix specifies requirements for the preparation of Instructions for Continued Airworthiness as required by 531.82.
(b) The Instructions for Continued Airworthiness for each balloon must include the Instructions for Continued Airworthiness for all balloon parts required by any applicable airworthiness or operational rule and any required information relating to the interface of those parts with the balloon. If Instructions for Continued Airworthiness are not supplied by the part manufacturer for a balloon part, the Instructions for Continued Airworthiness for the balloon must include the information essential to the continued airworthiness of the balloon.
(c) The applicant must submit to the Minister a program to show how changes to the Instructions for Continued Airworthiness made by the applicant or by the manufacturers of balloon parts will be distributed.
(a) The Instructions for Continued Airworthiness must be in the form of a manual or manuals as appropriate for the quantity of data to be provided.
(b) The format of the manual or manuals must provide for a practical arrangement.
The Instructions for Continued Airworthiness must contain the following information:
(a) Introduction information that includes an explanation of the balloon’s features and data to the extent necessary for maintenance or preventive maintenance.
(b) A description of the balloon and its systems and installations.
(c) Basic control and operation information for the balloon and its components and systems.
(d) Servicing information that covers details regarding servicing of balloon components, including burner nozzles, fuel tanks, and valves during operations.
(e) Maintenance information for each part of the balloon and its envelope, controls, rigging, basket structure, fuel systems, instruments, and heater assembly that provides the recommended periods at which they should be cleaned, adjusted, tested, and lubricated, the applicable wear tolerances, and the degree of work recommended at these periods. However, the applicant may refer to an accessory, instrument, or equipment manufacturer as the source of this information if the applicant shows that the item has an exceptionally high degree of complexity requiring specialised maintenance techniques, test equipment, or expertise. The recommended overhaul periods and necessary cross references to the Airworthiness Limitations section of the manual must also be included. In addition, the applicant must include an inspection program that includes the frequency and extent of the inspections necessary to provide for the continued airworthiness of the balloon.
(f) Troubleshooting information describing probable malfunctions, how to recognise those malfunctions, and the remedial action for those malfunctions.
(g) Details of what, and how, to inspect after a after a Harding Landing.
(h) Instructions for storage preparation, including any storage limits.
(i) Instructions for repair of the balloon envelope and its basket or trapeze.
A531.4 Airworthiness Limitations Section
[The Instructions for Continued Airworthiness must contain a section titled Airworthiness Limitations that is segregated and clearly distinguishable from the rest of the document. This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure, including envelope structural integrity, required for type certification. If the Instructions for Continued Airworthiness consist of multiple documents, the section required by this paragraph must be included in the principal manual. This section must contain a legible statement in a prominent location that reads:
"The Airworthiness Limitations section is approved by the Minister and specifies maintenance requirements that are mandatory for the continued airworthiness of this aircraft as specified in CAR 605.84".]
(Change 531-1 (91-06-01))
(Change 531-2 (97-04-07))
- Date modified: