Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

HQ - Maintenance and Manufacturing - Exemptions

Exemption

Expiry date/Note

Exemption from Appendix F to chapter 507
Exemption 		This exemption will remain in force until Appendix F of chapter 507-Standards Respecting Ex-military
Aircraft-are amended.
There is no expiry date on the exemption.
(S C of A Limited, New Rules)

Exemption from section 549.01 of the CARs and chapter 549 of the Airworthiness Manual-Amateur-built aircraft.
Exemption

In effect until appropriate provision of the CARs come into effect. (S C of A Amateur-built, New Rules)

Exemption from subsection 573.09 (5) of the CARs. Applies to holders of AMO certificates that employ only one person in the performance of all functions related to the CARs.
(QA)
Exemption

In effect until appropriate provision of the CARs come into effect.

Exemption from subsection 201.01 of the CARs. Operators of aircraft will not be required to amend their aircraft identification plate, in order to reflect a new holder of the aircraft type certificate.
Exemption

In effect until an amendment modifying the definition of “manufacturer” is introduced into the CARs

Exemption to permit VIH Helicopters Ltd. to install overhauled components supplied by foreign maintenance organizations that do not hold FAMO certification.  
Exemption 		31 August 2012
Exemption from section 571.04 of the CARs. The purpose of this exemption is to provide relief to specifically identified persons from the avionics specialized maintenance rules, when they install and certify a maintenance release, for the installation of TSO C126 406 MHz ELTs in an aircraft. 
Exemption 		30 September 2012

From Subsections 202.35(1) and 202.36(1) of the Canadian AviationRegulations - To transfer legal custody and control of those aircraft to the Department of National Defence (DND)
Exemption

September, 30 2012

Exemption from subsection 605.85 (1) of the CARs. Allow operators to perform AD 2005-21-02 without requiring a maintenance release.
(Hughes 369 rotor blades)
Exemption

31 January 2013

Exemption from subsection 605.85(1) of the CARs. The purpose of this exemption is to permit continued operation of aircraft with Walter M601 engines identified by serial number, which were maintained, modified or overhauled by Walter a.s., Walter Engines a.s. or GE Aviation Czech s.r.o. prior to September 10, 2009, where the maintenance was not certified by the signing of a maintenance release pursuant to section 571.10.emption 30 June 2013

Exemption from subsection 573.02 (11) of the Standard 573 and section 573 of the Canadian Aviation Regulations
 The purpose of this exemption is to relieve avionics, instrument and component rating AMOs from the requirements of Standard 573.02 (11).xemption

31 July 2013

Exemption from section 571.04 of the CARs. Applies to holder of AMO certificates issue under section 573.02 of the CARs and not holding a specific welding certificate.
Exemption

 16 August 2013

Date modified:
2012-05-24