1. Home
2. Marine Transportation
3. Marine Safety
4. Marine Safety Publications
5. Standards for Navigating Appliances and Equipment - TP 3668 E

Standards for Navigating Appliances and Equipment - TP 3668 E

Next Page

MARINE SAFETY DIRECTORATE
TRANSPORT CANADA
OTTAWA
1983

TABLE OF CONTENTS

• Foreword

1. Introduction
2. Certification
3. Inspection
4. General Requirements
   • 4.1 Introduction
   • 4.2 Operation
   • 4.3 Power Supply
   • 4.4 Durability and Resistance to Environmental Conditions
   • 4.5 Interference
   • 4.6 Miscellaneous
   • 4.7 International Standard
   • 4.8 Effective Date
     
     
5. Standards For Magnetic Compasses
   • 5.1 Definitions
   • 5.2 Compass Card
   • 5.3 Materials
   • 5.4 Performance
   • 5.5 Constructional Error
   • 5.6 Correcting Devices
   • 5.7 Construction
   • 5.8 Positioning
   • 5.9 International Standard
   • 5.10 Effective Date
     
     
6. Standards For GYRO-Compasses
   • 6.1 Introduction
   • 6.2 Definitions
   • 6.3 Method of Presentation
   • 6.4 Illumination
   • 6.5 Accuracy
   • 6.6 Power Supply
   • 6.7 Interference
   • 6.8 Durability and Resistance to Effects of Climate
   • 6.9 Construction and Installation
   • 6.10 International Standard
   • 6.11 Effective Date
     
     
7. Standards For Automatic Pilots
   • 7.1 General
   • 7.2 Changing Over From Automatic to Manual Steering and Vice Versa
   • 7.3 Alarm Signaling Facilities
   • 7.4 Controls
   • 7.5 Rudder Angle Limitation
   • 7.6 Permitted yaw
   • 7.7 International Standard
   • 7.8 Effective Date
     
     
8. Standards For Radar
   • 8.1 Application
   • 8.2 General
   • 8.3 ALL Radar Installations
   • 8.4 Multiple Radar Installations
   • 8.5 Symbols For Radar Controls
   • 8.6 Code of Practice
   • 8.7 International Standard
   • 8.8 Effective Date
   • 8.9 Symbols
     
     
9. Standards For Automatic Radar Plotting Aids (ARPA)
   • 9.1 Introduction
   • 9.2 Definitions
   • 9.3 Performance Standards
   • 9.4 International Standard
   • 9.5 Effective Date
   • Appendix 1 - Definitions of Terms to be used only in Connection With ARPA Standards
     • Appendix 2 - Operational Scenarios 
       • Scenario 1
       • Scenario 2
       • Scenario 3
       • Scenario 4
     • Appendix 3 - Sensor Errors 
       • Radar
       • GYRO Compass
       • Log
10. Standards For Radio Direction-Finding Systems
    • 10.1 Introduction
    • 10.2 Frequency Ranges and Classes of Emission
    • 10.3 Selectivity
    • 10.4 Signal Identification
    • 10.5 Bearing  Interdiction
    • 10.6 Bearing Accuracy
    • 10.7 Manual Controls and Their Operation
    • 10.8 Operational Availability
    • 10.9 Power Supply
    • 10.10 Durability and Resistance to Effects of Climate
    • 10.11 Special Requirements For Different Methods of Direction-Finding
    • 10.12 Miscellaneous
    • 10.13 International Standard
    • 10.14 Effective Date
      
      
11. Standards For Electronic Position Fixing Equipment
    • 11.1 Loran-C System
    • 11.1.2 Accuracy
    • 11.1.3 Dynamic Range
    • 11.1.4 Signal Lock-on
    • 11.1.5 Continuous Wave Interference (CWI)
    • 11.1.6 Sky wave Rejection
    • 11.1.7 Cross-Rate Interference (CRI)
    • 11.1.8 Alarms
    • 11.1.9 Dynamic Tracking
    • 11.1.10 Displays
    • 11.1.11 Combinations of Conditions
    • 11.1.12 Minimum Test Standards
    • 11.1.13 International Standard
    • 11.1.14 Effective Date
    • 11.2 Satellite Navigation stem (SATNAV)
    • 11.2.2 International Standard
    • 11.2.3 Effective Date
    • 11.3 Differential Omega
    • 11.3.1 Introduction
    • 11.3.2 Performance Standards For The Recreation of Omega Signals
    • 11.3.3 Additional Performance Standards For The Reception of Differential Omega
    • 11.3.3.11 International Standard
    • 11.3.3.12 Effective Date
      
      
12. Standards For An Echo-sounder
    • 12.1 Introduction
    • 12.2 Range of Depths
    • 12.3 Range Scales
    • 12.4 Method of Presentation
    • 12.5 Illumination
    • 12.6 PULSE Repetition Rate
    • 12.7 Accuracy of Measurement
    • 12.8 Roll and Pitch
    • 12.9 Power Supply
    • 12.10 Interference
    • 12.11 Durability and Resistance to Effects of Climate
    • 12.12 Miscellaneous
    • 12.13 International Standard
    • 12.14 Effective Date
      
      
13. Standards For Devices to Indicate Speed and Distance
    • 13.1 Introduction
    • 13.2 Methods of Presentation
    • 13.3 Accuracy of Measurement
    • 13.4 Roll and Pitch
    • 13.5 Construction and Installation
    • 13.6 International Standard
    • 13.7 Effective Date
      
      
14. Standards For Rate-of-Turn Indictors
    • 14.1 Operational Standards
    • 14.2 Indication
    • 14.3 Range Scales
    • 14.4 Accuracy
    • 14.5 Operation
    • 14.6 International
    • 14.7 Effective Date
      
      
15. Information to be Included In Maneuvering Booklets
    • 15.1 Manoeuvring Data and/or Diagram
      • Turning Circle Diagram
      • Stopping Curves Diagram
    • 15.2 Supplementary Information
    • 15.3 International Standard
    • 15.4 Effective Date

Next Page

Date modified:

2010-01-14

Primary navigation