1. Home
2. Rail Transportation
3. Rail Safety
4. Legislation
5. Guidelines
6. Guideline for Culvert Safety Management

Guideline for Culvert Safety Management

Table of Contents

• Foreword
• Part A - General
  • 0.1 - Definitions
  • 0.2 - Scope
  • 0.3 - Application
  • 0.4 - Responsibility
• Part B - Culvert Safety Assurance
  • 1.1 - Safety Management Systems (SMS)
• Part C - Qualifications and Designation of Responsible Persons
  • 2.1 - Scope
  • 2.2 - Culvert Safety Management Responsibility
  • 2.3 - Railway Engineer
  • 2.4 - Culvert Inspector
  • 2.5 - Designation of Individuals
• Part D - Culvert Design 
  • 3.1 - Scope
  • 3.2 - Design and Installation of New Culverts
  • 3.3 - Replacement and Repair of Existing Culverts
• Part E - Culvert Inspection
  • 4.1 - Scope
  • 4.2 - Culvert Inventory
  • 4.3 - Scheduling of Culvert Inspections
  • 4.4 - Culvert Inspection Procedures
  • 4.5 - Special Inspections
  • 4.6 - Submerged Culverts
  • 4.7 - Inspection of Drainage Channel Conditions
  • 4.8 - Culvert Inspection Records
  • 4.9 - Review of Culvert Inspection Reports
  • 4.10 - Culvert Hazard Identification and Risk Assessment
• Part F - Requirements of Section 11 - Railway Safety Act
  • 5.1 - Scope
  • 5.2 - Engineering Work Related to Culverts
• Part G - Documentation, Records and Audit of Culvert Safety Management Programs
  • 6.1 - Scope
  • 6.2 - Audits, General
  • 6.3 - Documents and Data Management
  • 6.4 - Electronic Record Keeping

• Appendix - Guideline for Culvert Safety Management with Clarification Comments on Grey Background

Date modified:

2012-03-13

Primary navigation