THE FOLLOWING INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE - TRANSPORT CANADA AND THE REGISTRAR OF
IMPORTED VEHICLES DOES NOT GUARANTEE ITS ACCURACY - Feb/10/2012 Edition
Section 11 - ALL TRAILERS (see exceptions) WITH A GVWR OF 4 536 KG OR MORE, MANUFACTURED AFTER SEPTEMBER 1, 2007, MUST BE EQUIPPED WITH A REAR IMPACT GUARD (RIG) THAT CONFORMS TO SECTION (3) OF CMVSS 223 - REAR IMPACT GUARD. See "EXPLANATIONS" section, paragraph #10.
THE EXCEPTIONS ARE:
(a) a pole trailer, a pulpwood trailer, a wheels back trailer or a trailer designed to be used as temporary living quarters (i.e. travel / RV trailer);
(b) a low-chassis trailer (i.e. horse / stock trailer, boat trailer); and
(c) a trailer designed to interact with, or having, work-performing equipment located in or moving through the area that would be occupied by a horizontal member that meets the configuration requirements specified in the standard.
Most trailers with a GVWR of 4,536 kg. or more sold at the retail level in the U.S. and manufactured after September 1, 2007 may not
be equipped with a rear impact guard that conforms to Canadian requirements. The following is a list of manufacturers who have demonstrated compliance to CMVSS 223, Rear Impact Guard.
ADVANCED WELDING & MANUFACTURING INC.
ALLOY CUSTOM PRODUCTS INC.
ALUMINUM CARGO TRAILERS, INC.
BARRETT TRAILERS, INC.
BEALL TRAILERS OF CALIFORNIA, INC.
BEHNKE ENTERPRISES INC.
BENSON INTERNATIONAL
BISON MANUFACTURING, LLC
CHAPARRAL MANUFACTURING INC
CHEETAH CHASSIS CORPORATION
CORNELIUS MFG. (CORN PRO)
COTTRELL, INC
DAKOTA MFG. CO. INC.
DAKOTA TRAILER MANUFACTURING INC
EAGER BEAVER
EAST MANUFACTURING CORPORATION
EVACO ACQUISITION CORP., INC. (D.B.A. SUPERLINE TRAILERS)
FAB TEC INC.
FEATHERLITE MFG. INC.
FONTAINE TRAILER COMPANY
FRIESEN WELDING
GEM STATE MANUFACTURING COMPANY
GREAT DANE TRAILERS INC.
GREAT NORTHERN TRAILER WORKS, INC.
GROUND HEATERS INC.
H & H TRAILER CO.
HACKNEY / A DIVISION OF SPECIALIZED VEHICLES CORP.