This reference sets out the minimum data required for the initial and recurrent Flight Training device (FTD) certification. It is intended for the use of the FTD operator to complete the initial and recurrent certification validation tests.
The initial qualification has a dual purpose, firstly to ensure that the handling characteristics and performance of the FTD are comparable to the aircraft type presented and secondly, to establish some baseline values for the annual validation tests. The subsequent annual validation tests should that the FTD performance remains within the tolerances to maintain certification.
Operators requesting FTD certifications shall contact the Superintendent - Flight Training at the Transport Canada Regional office to coordinate the data collection process for the FTD initial and recurrent certification validation tests.
Detailed descriptions and explanations of the validation tests can be found in Chapter 4 of the Aeroplane and Rotorcraft Simulator Manual (TP 9685) published by Transport Canada and available at:
Aeroplane and Rotorcraft Simulator Manual - TP 9685E
Once completed, this Qualification Test Guide (QTG) is to be retained on file by the FTD operator for future reference during recurrent validation tests. A Transport Canada - Civil Aviation Inspector shall monitor the conduct of the initial validation test and may monitor recurrent validation tests.