Part 10

This page has been archived on the Web

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

As of March 2020, the TDG Regulations will appear on the Justice Laws website.

TDG Regulations

 
 

The TDG Regulations have been consolidated to include amendment SOR/2019-101 (Emergency Response Assistance Plan).

Disclaimer: These documents are not the official versions
(more details).

RAIL

TABLE OF CONTENTS

Definitions

SECTION

RAIL

Definitions

Definitions for the following terms, used in this Part, are provided in Part 1, Coming into Force, Repeal, Interpretation, General Provisions and Special Cases:

  • aircraft
  • carrier
  • 49 CFR
  • class
  • classification
  • consignment
  • consignor
  • dangerous goods
  • dangerous goods safety mark
  • ERAP SOR/2019-101
  • handling
  • ICAO Technical Instructions
  • IMDG Code
  • large means of containment
  • means of containment
  • person
  • railway vehicle
  • shipping document
  • shipping name
  • train
  • UN Recommendations
  • vessel SOR/2017-253
 

According to the definition of "import", when dangerous goods being imported are being transported to a place in Canada, the person who imports the dangerous goods is the consignor. If the dangerous goods are being transported through Canada, each person who transports them in Canada (that is, each carrier) is the consignor while in possession of the dangerous goods.

10.1 Transporting Dangerous Goods from the United States into or through Canada

Consignments of dangerous goods that originate in the United States are subject to expert inspection by U.S. inspectors. These consignments can be transported in Canada under the requirements of 49 CFR. However, consignments that originate in Canada are not permitted under these Regulations to be transported in Canada under 49 CFR only, because these consignments are not subject to expert inspection by U.S. inspectors.

(1) Despite the requirements in Part 2, Classification, Part 3, Documentation and Part 4, Dangerous Goods Safety Marks, a person may handle or transport dangerous goods by railway vehicle from a place in the United States to a place in Canada or from a place in the United States through Canada to a place outside Canada in accordance with the classification, marking, labelling, placarding and documentation requirements of 49 CFR if

(a) the information required on the shipping document is easy to identify, legible, in indelible print, in English or French and includes

(i) when dangerous goods are transported to a place in Canada, the name and address of the place of business in Canada of the consignor,

The consignor in this case is the consignee in Canada.

(ii) when dangerous goods are transported from a place in the United States through Canada to a place outside Canada, the name and the address of the place of business of each consignor, except that in this case the name and address may be shown on a separate document attached to the shipping document and is required only while that person is the consignor,

The consignor in this case is the carrier.

(iii) the classification in Schedule 1 or in the UN Recommendations, for dangerous goods that have the letter "D" assigned to them in column 1 of the table to section 172.101 of 49 CFR, except for dangerous goods with the shipping name "Consumer commodity", and
SOR/2008-34

(iv) if applicable, the information relating to the approved ERAP referred to in subsection 3.6(1);
SOR/2019-101

(b) the person complies with the following sections in Part 3, Documentation:

(i) section 3.2, Carrier Responsibilities,

(ii) section 3.8, Location of a Shipping Document and Consist: Rail, and

(iii) section 3.10, Location of a Shipping Document: Storage in the Course of Transportation, and
SOR/2008-34

(c) on or after August 31, 2008, the labels and placards displayed for dangerous goods included in Class 2.3 or 6.1 are the labels and placards required in these Regulations for the dangerous goods. The labels or placards may be displayed before August 31, 2008.
SOR/2008-34

(2) Subsection (1) does not apply to dangerous goods that

(a) are forbidden for transport by these Regulations;

(b) are not regulated by 49 CFR but are regulated by these Regulations; or
SOR/2017-137

(c) Repealed
SOR/2017-137

(d) are given dangerous goods safety mark or packaging exceptions in 49 CFR that are not permitted by these Regulations.
SOR/2008-34

(3) A person who handles or transports dangerous goods by railway vehicle in accordance with an exemption issued under Subpart B of Part 107 of 49 CFR may do so from a place in the United States to a place in Canada or from a place in the United States through Canada to a place outside Canada if the exemption number appears on the shipping document.
SOR/2017-137

(4) If there is a conflict between the requirements of Part 2 (Classification), Part 3 (Documentation), Part 4 (Dangerous Goods Safety Marks) or Part 5 (Means of Containment) and an exemption referred to in subsection (3), the exemption prevails to the extent of the conflict.
SOR/2017-137

10.1.1 Railway Vehicle Reciprocity
SOR/2019-75

Despite the requirements of Part 5 (Means of Containment), a person may offer for transport, handle or transport dangerous goods by railway vehicle from a place in the United States to a place in Canada or from a place in the United States through Canada to a place outside Canada in accordance with the requirements of Parts 172, 173, 174, 179 and 180 of 49 CFR, except by tank car if the goods are Class 3, Flammable Liquids that are referred to in section 10.5.6 of TP 14877.
SOR/2019-75

10.2 Transporting Dangerous Goods to or from an Aircraft, an Aerodrome or an Air Cargo Facility

(1) Despite the requirements in Part 2, Classification, Part 3, Documentation, and Part 4, Dangerous Goods Safety Marks, if transport has been or is to be by aircraft, a person may handle or transport dangerous goods by railway vehicle to or from an aircraft, an aerodrome or an air cargo facility in accordance with the classification, marking, labelling and documentation requirements of the ICAO Technical Instructions, if

(a) the information required on the shipping document is easy to identify, legible, in indelible print, in English or French and includes, if applicable, the information relating to the approved ERAP referred to in subsection 3.6(1); and
SOR/2019-101

(b) the person complies with the following provisions in Part 3, Documentation:

(i) section 3.2, Carrier Responsibilities,

(ii) paragraph 3.5(1)(f) and subsection 3.5(2), concerning a 24-hour number on a shipping document,

(iii) section 3.8, Location of a Shipping Document and Consist: Rail, and

(iv) section 3.10, Location of a Shipping Document: Storage in the Course of Transportation.
SOR/2002-306

(2) Subsection (1) does not apply if these Regulations forbid the transport of the dangerous goods or if the dangerous goods are not regulated by the ICAO Technical Instructions but are regulated by these Regulations.

(3) When dangerous goods are transported to or from an aircraft, an aerodrome or an air cargo facility, by railway vehicle, the railway vehicle, or any means of containment visible from outside the railway vehicle must have placards displayed on it in accordance with Part 4, Dangerous Goods Safety Marks.
SOR/2008-34

10.3 Transporting Dangerous Goods to or from a Vessel, a Port Facility or a Marine Terminal
SOR/2017-253

(1) Despite the requirements in Part 2, Classification, Part 3, Documentation, and Part 4, Dangerous Goods Safety Marks, if transport has been or is to be by vessel, a person may handle an international consignment of dangerous goods or transport it by railway vehicle to or from a vessel, a port facility or a marine terminal in accordance with the classification, marking, labelling, placarding and documentation requirements of the IMDG Code if
SOR/2017-253

(a) the information required on the shipping document is easy to identify, legible, in indelible print, in English or French and includes, if applicable, the information relating to the approved ERAP referred to in subsection 3.6(1); and
SOR/2019-101

(b) the person complies with the following provisions in Part 3, Documentation:

(i) section 3.2, Carrier Responsibilities,

(ii) paragraph 3.5(1)(f) and subsection 3.5(2), concerning a 24-hour number on a shipping document,

(iii) section 3.8, Location of a Shipping Document and Consist: Rail, and

(iv) section 3.10, Location of a Shipping Document: Storage in the Course of Transportation.
SOR/2002-306

(2) Subsection (1) does not apply if these Regulations forbid the transport of the dangerous goods or if the dangerous goods are not regulated by the IMDG Code but are regulated by these Regulations.

(3) When dangerous goods are transported in a large means of containment to or from a vessel, a port facility or a marine terminal, the large means of containment must have placards displayed on it in accordance with Part 4, Dangerous Goods Safety Marks, or the IMDG Code
SOR/2017-253

10.4 Reshipping in Canada

(1) When a consignment of dangerous goods is transported from a place outside Canada to a place in Canada and is reshipped within Canada by railway vehicle, the dangerous goods safety marks displayed in accordance with 49 CFR, the ICAO Technical Instructions or the IMDG Code at the time of entry into Canada may continue to be displayed, except that the large means of containment containing the dangerous goods must have placards displayed on it in accordance with Part 4, Dangerous Goods Safety Marks.

If the dangerous goods are not regulated in Canada, the placards are not required to be displayed on the large means of containment.
SOR/2012-245

(2) The shipping document that accompanies the dangerous goods must include a notation that the dangerous goods safety marks are in accordance with 49 CFR, the ICAO Technical Instructions or the IMDG Code, if they differ from the ones required to be displayed by Part 4, Dangerous Goods Safety Marks.

10.5 Repealed SOR/2008-34

10.6 Location of Placarded Railway Vehicle in a Train
SOR/2008-34

(1) Unless it is likely to have a serious impact on train dynamics, a person must not, in a train, locate a railway vehicle that contains dangerous goods described in column 1 of the table to this subsection for which a placard is required to be displayed in accordance with Part 4, Dangerous Goods Safety Marks, next to a railway vehicle described in the same row in column 2.
SOR/2008-34

Table
SOR/2008-34

Item Column 1

Dangerous Goods
Column 2

Railway vehicle
1. Any class of dangerous goods (a) an operating engine or an engine tender unless all the railway vehicles in the train, other than engines, tenders and cabooses, have placards displayed on them;

(b) an occupied railway vehicle unless all the other railway vehicles in the train, other than engines, tenders and cabooses, are occupied or have placards displayed on them;

(c) a railway vehicle that has a continual source of ignition; or

(d) any open railway vehicle,

(i) when the lading protrudes beyond the railway vehicle and may shift during transport, or

(ii) when the lading is higher than the top of the railway vehicle and may shift during transport.

2. Dangerous goods included in Class 1.1 or Class 1.2 Any railway vehicle that is required to have a placard displayed on it for Class 2, 3, 4 or 5.
3. UN1008, BORON TRIFLUORIDE COMPRESSED

UN1026, CYANOGEN

UN1051, HYDROGEN CYANIDE, STABILIZED

UN1067, DINITROGEN TETROXIDE or NITROGEN DIOXIDE

UN1076, PHOSGENE

UN1589, CYANOGEN CHLORIDE, STABILIZED

UN1614, HYDROGEN CYANIDE, STABILIZED

UN1660, NITRIC OXIDE, COMPRESSED

UN1911, DIBORANE, COMPRESSED

UN1975, NITRIC OXIDE AND DINITROGEN TETROXIDE MIXTURE or NITRIC OXIDE AND NITROGEN DIOXIDE MIXTURE

UN2188, ARSINE

UN2199, PHOSPHINE

UN2204, CARBONYL SULPHIDE or CARBONYL SULFIDE

UN3294, HYDROGEN CYANIDE, SOLUTION IN ALCOHOL
Any railway vehicle that is required to have a placard displayed on it for Class 1, 2, 3, 4 or 5 unless the railway vehicle next to it contains the same dangerous goods

(2) Dangerous goods that are being transported in railway vehicles in a train from the United States to Canada or from the United States through Canada to a place outside Canada may be located in the train in accordance with sections 174.84 and 174.85 of 49 CFR.
SOR/2008-34

10.7 Coupling of Railway Vehicles

(1) A person must not couple a railway vehicle with another railway vehicle at a relative coupling speed greater than 9.6 km/h (6 mph) if either of the railway vehicles that make contact on coupling contains dangerous goods for which a placard is required to be displayed in accordance with Part 4, Dangerous Goods Safety Marks.

(2) Despite subsection (1), a person may couple a single railway vehicle moving under its own momentum at a relative coupling speed less than or equal to 12 km/h (7.5 mph) when the ambient temperature is above -25ºC.

(3) If a person couples a tank car that contains dangerous goods for which a placard is required to be displayed in accordance with Part 4, Dangerous Goods Safety Marks, with another railway vehicle and the three conditions in any one of the four rows set out in the table to this subsection apply, the person must

(a) visually inspect the underframe assembly and coupling and cushioning components of the tank car to ensure their integrity before the tank car is moved more than 2 km from the place where the coupling occurred; and

(b) report, in writing, to the owner of the tank car within 10 days after the coupling and include a copy of the text of this section and information about any damage that compromises the integrity of the underframe assembly or draft gear of the tank car discovered as a result of the inspection.
SOR/2008-34

Table
SOR/2008-34

Item Column 1

Combined Coupling Mass: Tank Car and Other Railway Vehicle, and their Contents, in Kilograms
Column 2


Ambient Temperature: in Degrees Celsius
Column 3

Relative Coupling Speed: in Kilometres per hour
1. > 150 000 = -25 > 9.6
2. > 150 000 > -25 > 12
3. = 150 000 = -25 > 12.9
4. = 150 000 > -25 > 15.3

(4) The owner of a tank car who receives the report must not use the tank car or permit the tank car to be used to transport dangerous goods, other than the dangerous goods that were contained in the tank car at the time of the coupling, until the tank car undergoes

(a) a visual inspection and a structural integrity inspection in accordance with clause 9.5.6(a) and clause 9.5.7 of TP14877; and
SOR/2014-152

(b) for a tank car equipped with a stub sill, a stub sill inspection covering at least the following areas:

(i) the termination of the stub sill reinforcement pad closest to the mid-point of the tank car and associated welds for a 30-cm length from that point back towards the other end of the pad,

(ii) all welds

(A) connecting the head brace to the stub sill,

(B) between the head brace and the head reinforcement pad, and

(C) between the tank and the head reinforcement pad and, if the head reinforcement pad is connected to the stub sill reinforcement pad, 2.5 cm past that connection towards the centre of the tank,

(iii) all metal of the stub sill assembly, other than welds, from the body bolster to the coupler, and

(iv) the draft gear pocket.
SOR/2008-34

(5) This section does not apply if either the tank car or the other railway vehicle that was coupled is equipped with a cushioning device designed for a displacement of 15 cm (6 in.) or more in compression and capable of limiting the maximum coupler force to 4 448 kilonewtons (1,000,000 lbf) when impacted at 16.1 km/h (10 mph) by a railway vehicle having a gross mass of 99 790 kg (220,000 lb).
SOR/2019-75

10.8 Reporting
SOR/2019-75

A consignor shall, on reasonable notice given by the Minister, provide the Minister with the following information:

(a) the number of tank cars owned or leased by the consignor that meet the requirements of TP 14877 for TC117R tank cars;

(b) the number of tank cars owned or leased by the consignor that meet the requirements of TP 14877 for TC117P tank cars;

(c) the number of tank cars owned or leased by the consignor and used for importing, offering for transport or handling dangerous goods included in Class 3, Flammable Liquids, that meet the requirements of TP 14877 for Class 111 tank cars; and

(d) the number of tank cars owned or leased by the consignor and used for importing, offering for transport or handling dangerous goods included in Class 3, Flammable Liquids, that meet the requirements of TP 14877 for enhanced Class 111 tank cars.
SOR/2019-75